No Products in the Cart
The Monitor 200 measures alpha, beta, gamma, and x-rays. Its digital display shows readings in your choice of CPM, CPS, µSv/hr, mR/hr, or in accumulated counts.
Detector
Halogen-quenched GM tube with thin mica end window. Mica window density 1.5-2.0 mg/cm2. Effective window diameter is .360 inch. Side wall is .012 inch thick.
Operating Range
mR/hr – .001 (1µR) to 200 mR/hr
µSv/hr – .01 to 2000
CPM – 0 to 214,000
CPS – 0 to 3575
Total Counts – 1 to 9,999,000 counts
Accuracy
Typically ±15% from factory, ±10% (NIST)
Energy Sensitivity
1070 CPM/mR/hr referenced to Cs137
Detects alpha down to 2.5 MeV; typical detection efficiency at 3.6 MeV is greater than 80%.
Detects beta at 50 keV with typical 35% detection efficiency.
Detects beta at 150 keV with typical 75% detection efficiency.
Detects gamma and x-rays down to 10 keV typical through the window, 40 keV minimum through the case.
Anti-Saturation
Readout will OVERRANGE in radiation fields as high as 100 times the maximum reading.
Alert
Pulsating beeper sounds the alert.
Display
Graphic LCD with Backlight.
Count Light
Red LED flashes with each count.
Audio Indicator
Sounds with each count (can be switched off for silent operation)
Outputs
USB for use with Observer USB Software Family
Power Requirements
Two AA alkaline batteries (included)
Size
140 X 68 X 33 mm (3.5 X 2.7 X 1.3 in.)