Call Us: +1 866 300 9012

contact@measur.ca

Call Us: +1 866 300 9012

contact@measur.ca
SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine
Electromechanical Universal Test Machine

    Electromechanical Universal Test Machine

    $0.73

    ISO 7500-1

     

    UTM-8100, 100 kN and UTM-8300, 300 kN capacity fully automatic UTEST Electromechanical Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials UTM 8100 and UTM- 8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, tests on steel, soil, concrete, cement, rock, asphalt and similar materials, by using suitable accessories.

    These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

    Advanced closed loop control system assures accurate load or displacement pace rate on sample.

    The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

    The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

    UTM-8100 supplied with compression platens and load cells 50 kN capacity.UTM-8300 supplied with compression platens  and load cells 300 kN capacity

    Gripping systems, extensometers and accessories are not included and have to be ordered separately.

     

    Frame Features

     

    UTM-8100.SMD2

    UTM-8300.SMD2

    Max. Load

    100 kN

    300 kN

    Max. Vertical Test Space

    (without accessories)

    (Lower crosshead at

    middle stroke.

     

    650 mm

     

    850 mm

    Distance Between Columns

    440 mm

    630 mm

    Crosshead Travel

    400 mm

    200 mm

    Test Speed Range

    0-100 mm/min.

    0-75 mm/min.

    Load Rate

    0,001-2 kN/s

    (Depend on specimen stiffness)

    0,001-10 kN/s

    (Depend on specimen stiffness)

    Machine Class

     

    Class 1 starting from

    1% of the capacity

    Class 1 starting from

    1%of the capacity

    Encoder Resolution

    0.001mm

    0,001 mm

    Encoder Accuracy

    0,01

    0,01

    Overall Dimensions

    1300x520x2300 mm

    1100x450x1860 mm

    Weight Approx.

    400 kg

    800 kg

     

    ACCESSORIES

    General Accessories;

    • UTGM-0010 Load Cell, 5 kN Capacity, S Type
    • UTGM-0015 Load Cell, 10 kN Capacity, Pancake Type
    • UTGM-0020 Load Cell, 20 kN Capacity, Pancake Type
    • UTGM-0025 Load Cell, 50 kN Capacity, Pancake Type
    • UTGM-0030 Load Cell, 100 kN Capacity, Pancake Type
    • UTGM-0035 Load Cell, 300 kN Capacity, Pancake Type

     

    Data Acquisition & PC Software

    Digital display graphics data acquisition and control system are designed to control the machine and process the data from encoders, Load cells, installed on the Electromechanical Test Machine frame. It has graphical TFT display of 240x128 pixel and show both load and displacement. The digital unit sends all these information to PC and accepts commands of Start, Stop, and Test Speed etc.

    Manual zeroing of all engineering values exist prior to the beginning of test.

    Materials testing software is available for Utest UTM series universal testing systems. Test software provides fully customized parameter definition, test method development tools, automatic test control, data collection, results analysis, and reporting.

    This flexable software solution supports multiple testing technologies and test types, allowing you to standardize your lab under a single software application. With several options for creating tests, and a separate application for running tests, you can allocate resources in the way that makes sense for your lab.

    Advanced templates for testing to ASTM, ISO and EN standards for tension testing, compression testing, flexure testing, and more across a wide variety of materials and applications help ensure quick and efficient test setup and execution.

    Various engineering calculations are performed automatically such as strain, tensile stress, compressional and flexural strength, elongation, yield point, elasticity modulus, absorbed energy, etc. with the software

    Test results stored in computer for your future retrieve or reanalysis and reporting. Data Exchange between other Windows based applications such as Excel, Word or output in PDF format.

     

    MATERIAL

    TEST/METHODS

    STANDARDS

    ACCESORIES

    STEEL

    (ROUNDS

    AND FLATS)

    Tensile Test under

    Load/Displacement

    Control

    EN ISO 6892-1

    UTM-8410 Tensile Grip, 100 kN, complete with jaw faces for round specimens from Ø4 to Ø9 mm and  Ø9 to Ø14 mm, for flats 0 to 7 mm  and 7 to 14 mm thick

     

    UTM-8430 Tensile Grip, 300 kN, complete with jaw faces  for round specimens from Ø8 to Ø16 mm and Ø16 to Ø24 mm, for flats 0 to 9 mm and 9 to 18 mm thick

     

    UTM-8055  Holder for Weld Shear Force Tests for welded fabric

     

     

     

     

     

     

     

     

     

     

     

    CEMENT

    AND

    MORTARS

    Compression Test

    Under Load Control

    EN 196-1

    ASTM C109

    UTCM-4210E Compression Jig Assembly EN, to test portions of 40,1x40x160 mm cement mortar prisms. (*)

     

    UTCM-4210A Compression Jig Assembly

    ASTM, to test 50 mm (2") cubes. (*)

    Flexure Tests Under

    Load Control

    EN 196-1

    ASTM C348

    EN 12808-3

    EN 1015-11

    UTCM-4200E Flexure Jig Assembly EN, to test 40,1x40x160 mm cement mortar prisms

     

    UTCM-4200A Flexure Jig Assembly ASTM,

    to test 40x40x160 mm mortar prisms,

    CONCRETE

    Flexure Tests on

    Concrete Beams

    under Load Control

    EN 12390-5

    ASTM C78, C293

    AASHTO T97

    BS 1881:118

    UTC-5501 Bearers, used for for 3 or 4 point flexural tests on concrete beams of 100x100x400-500 mm, 150x150x600-750 mm.

    Flexure Tests on

    Concrete Kerbs

    Under Load Control

    EN 1340

    UTC-5502 Flexural Testing Assembly for Concrete KerbsBearers.Consist of two lower

    roller of 38 mm dia. x 620 mm length and

    upper load point of 40 mm dia with ball

    seating, 300kN

    Splitting Tests

    on Concrete

    Cylindrical and

    Cubes Specimens,

    and concrete paving

    blosks under Load

    Control

    EN 12390-6

    AASHTO C496

    EN 1338

    UTC-0350 Splitting tensile test device for

    100x200 mm (4" x 8"), 150x300 mm (6" x 12")

     

    UTC-0351 Distance piece for UTC-0350E, for Ø100x200(Ø4x8")  mm and Ø110x220mm

     

    UTC-0360 Splitting tensile test device for

    150 mm concrete cubes (EN)

     

    UTC-0361 Distance piece for UTC-0360, for 100 mm cubes specimens, EN.

     

    UTC-0355 Splitting tensile test device for 60-100x220 mm (hxl) concrete block pavers. (EN)

    • (*) Up to the machine capacity
    • (**) Supplied complete with the connectiion appratus fit with the ordered machine.

     

    SOIL

    CBR Under Displacement Control

    EN 13286-47

    ASTM D1883

    AASTHO T193

    UTS-0870 CBR Penetration piston

     

    UTGM-0064  LPDT (linear potentiometric displacement transducer ) 50 mm x 0.001 mm 

     

    UTM-0114 Holder for UTGM-0062 and UTGM- 0064

     

    UTGM-0025 Load Cell, 50 kN Capacity, Pancake Type

    BITUMINOUS MIXURES

    Marshal Test Under Displacement Control

    EN 12697-34

    ASTM D1559

    UTM-1086 Marshall Penetration Piston for UTM-0108, UTM-8100 and UTM 8300

     

    UTGM-0064  LPDT (linear potentiometric displacement transducer ) 50 mm x 0.001 mm 

     

    UTM-0114 Holder for UTGM-0062 and UTGM- 0064

     

    UTAS-1057 Breaking Head (Stability Mould), cast iron, for 4" (101,6 mm) Marshall Samples

     

    UTAS-1058 Breaking Head (Stability Mould), cast iron, for 6" (152,4 mm) Marshall Samples

     

    UTGM-0025 Load Cell, 50 kN Capacity, Pancake Type

    Indirect Tensile Splitting Tests

    EN12697-23

    AASHTO T283

    UTAS-1063E Indirect Tensile Strength Test jig (EN), supplied with steel loading strips for Ø100 mm bituminous specimens .

     

    UTAS-1064E Pair of oading strips for Ø150 mm bituminous specimens.

     

    UTAS-1065E Pair of loading strips for Ø160 mm bituminous specimens

     

    UTAS-1063A Indirect Tensile Strength Test jig (ASTM), supplied with steel loading strips for Ø4"(101,6mm) bituminous specimens

     

    UTAS-1066A Pair of loading strips for Ø6"(152,4mm) bituminous specimens

     

    UTM-1086 Marshall Penetration Piston for UTM-0108, UTM-8100 and UTM 8300

     

    UTGM-0064  LPDT (linear potentiometric displacement transducer ) 50 mm x 0.001 mm 

     

    UTM-0114 Holder for UTGM-0062 and UTGM- 0064

     

    Duriez Test Under Displacement Control

    NF P98 251 1/4

    EN 12697-12  Method A and B

    UTAS-0490 Duriez Compression Test Set, 80 mm diameter. Only with UTM-8300

     

    UTAS-0500 Duriez Compression Test Set, 120 mm diameter. Only with UTM-8300

    BACK TO TOP