Concrete Pipe Testing Machine

UTSP-0190, 0192, 0194, 0196  models with outer diameters from 200 mm up to 2900 mm,  UTSP-0200, 0202, 0204, 0206 models with outer diameters from 200 mm up to 3700 mm  are specially designed for Crushing Tests on Sewer and Drain Pipes, Concrete Pipes, Fittings, Cones according to EN 1916. All these models can be used  for pipes with a length of up to 3000 mm

EN 1916

UTSP-0209 and UTSP-0210 model machine has the same specifications as UTSP-0202 with capacity of 400 kN instead of 1000 kN and can be used for outer diameters from 200 mm up to 2000 mm and lengths up to 2000 mm.

The Concrete pipe testing machines are consisting of a frame and a hydraulic power pack. The frames are rigid 2 column constructions with superior axial and lateral stiffness and are precision aligned. Integrated in the crosshead is a double acting actuator in servo-quality. The actuator has anti-rotation system to prevent the natural tendency of the actuator to rotate. The stroke of the double acting actuator is 300 mm. Load cell is used for precise load measurement and closed loop control.

The rectangular shaped top bearer is detachable from the actuator and the bottom bearer is V-shaped with an angle of 150°. During pipe loading the system permits top bearer to rotate 360 degrees at horizontal plane and allows it to move at vertical plane of a minimum value of ±8°. As an option 3- and 4-point bending accessories are available. Upper crosshead height adjustment is done with electric motor drive for easy and precise test set up and manual through locking pins are used to fix the upper crosshead.

There are two options available for frames first option is not including carrying chassis for the machines (UTSP-0200 and UTSP-0204). These types of frames have to be anchored to concrete base. All required parts to anchor the frame to the concrete base is supplied. The frames without carrying chassis is supplied with V shaped bottom bearers which can be anchored to concrete base.

For frames second option is including metal carrying chassis for the machines (UTSP-0202 and UTSP-0206). The carrying chassis is supplied with a V shaped bottom bearer fixed directly on the chassis.

There are also 2 options are available for power pack. The machine can be supplied with standard automatic power pack, dual stage, controlled by BC 100 or Advanced Automatic Power Pack with Proportional Valve.

UTSP-0208  For easy loading of  pipes (especially for diameters 2000mm and larger),  UTSP-0208 (Drive-in Hydraulic Lower Bearer (V-Shaped)  and Rail System) should be ordered separately. The bearer moves on the rail by an electrical motor and acts in the vertical direction hydraulically.Can be used with concrete pipe testing machines with /without carrying chassis.

Any machine having different capacities and features is available upon request