Rapid Chloride Permeability Test Equipment (RCPT) is used to evaluate the resistance of a concrete sample to the penetration of chloride ions. Test is performed by placing a 100 mm...
The Apparatus are used for determining the bond strength between anchored reinforcing steel bar (rebar) and concrete and for checking anchorage performance in-situ. LPI Battery Operated Digital Readout Unit connected...
Determining the position, depth and diameter of rebar can be detected in any constructions by Rebar Detector and can be displayed the results by UTC-2082. Rebar Detector & Monitor is...
Profometer PM-630 Rebar Detector is an advanced cover meter to detect location of rebars, measurement of concrete cover and bar diameters non-destructively by using the eddy current principle with pulse...
The PM8000 Profometer Rebar Diameter and Cover Meters are advanced tools used for locating and assessing rebars in concrete structures. The sensor can detect individual rebars, measure concrete cover at...
UTC-3000 Bartracker Concrete Covermeter is used to measure the thickness of concrete cover over steel reinforcement bars and metal pipes, furthermore it is also used to identify the location, orientation...
The products are used for monitoring of temperature development of mass concrete. The number of measurement points for connectors and the cable length needed for each measurement point should be...
Cracks occur in most buildings and civil engineering structures. Monitoring the changes in crack width is an important diagnostic technique for determining the cause and specifying the remedial work. UTC-3100...
Standard Crack Monitor has a simple design, is easy-to-use, and provides a measurement range of 20mm (0.78in) horizontally and 10mm (0.39in) vertically. The unit consists of an overlapping upper plate that...
Standard Crack Monitor has a simple design, is easy-to-use, and provides a measurement range of 20mm (0.78in) horizontally and 10mm (0.39in) vertically. The unit consists of an overlapping upper plate that...
Crack Monitor Plus is made of clear polycarbonate. Adjustable slots for screws provide secure placement and tamper resistance. Once in place, the monitor’s two plates can move independently. Monitoring in three dimensions...
Crack Width Gauge measures the width and length of cracks in concrete structures, pavements, and other structural materials like plaster or drywall. It is constructed of durable clear polycarbonate plastic. The gauge...
Corner Adapter has a rigid construction and can be used with Crack Monitors for monitoring internal or external corner angles of 70°—180°. Features: Monitors corner angles of 70°—180°. Slotted openings on one side...
Displacement Monitor is white plastic with easy-to-read divisions indicated in red. Designed to measure both horizontal and vertical displacement movements such as settling of a floor slab, the monitor can also...
TSA-271 Digital Caliper, 0-6in Range provides accurate inside, outside and depth measurements in inches or millimeters over a range of 6in (150mm). Resolution is 0.0005in or 0.01mm and jaw depth is...
TSA-268 Digital Caliper, 0-12in Range features extended length range for inside, outside and depth measurements of larger samples in inches or millimeters. Quality stainless steel caliper features smooth adjusting head with...
UTC-4050 Crack Microscope is a high definition device which is used for measuring crack widths both in concrete and other structures like masonry walls. Consists of an adjustable lamp unit...
10x Optical Comparator allows for convenient identification of sieve opening sizes and close examination of the wire cloth condition. The comparator has precision scales in inch and millimeter units that are...