The UTC-0580 Compacting Factor Apparatus is used to determine the compaction factor of concrete with low, medium and high workability. Standards BS 1881-103, 5075 Comprising two conical hoppers having a...
Cracks occur in most buildings and civil engineering structures. Monitoring the changes in crack width is an important diagnostic technique for determining the cause and specifying the remedial work. UTC-3100...
Concrete Compressometers are used to determine the deformation (both axial and diametrical) of concrete cylinder or cube specimens during the compression test. Standards ASTM C469 There are 6 different models...
Beam moulds are manufactured in accordance with dimensions and tolerances stated in the related standards. Standards EN 12390-1, 12390-2; BS 1881; ASTM C31, C78, C192, C293; AASHTO T23, T97,...
Cast iron and hard plastic moulds are manufactured in accordance with dimensions and tolerances stated in the relevant standard. Four part body and attached to the base with a robust...
The UTC-0790 mixer is used for efficient mixing of concrete, plaster and mosaic. 125 lt. mixing volume and 2-3 m3/h lightweight mixer is equipped with rubber wheels which provide high...
The efficient mixing of concrete is essential if quality specimens are to be manufactured. Pan Type Concrete Mixers are designed to give efficient mixing of both dry and wet materials....
To find out the effects of the different type constituents on the concrete properties requires the preparation of numerous and higher volume of concrete batches such as RCC (Roller Compacted...
The difference of UTC-0742 and UTC-0752 from conventional mixers (UTC-0750, UTC-0751) is their ability of preparing more homogeneous mixture in a short time through the second motor that rotates the...
The UTC-0700 and UTC-0701 Concrete Mortar Penetrometers are used for the determination of setting time of the mortar fraction of fresh concrete. The apparatus consist of a spring loading device....
UTSP-0190, 0192, 0194, 0196 models with outer diameters from 200 mm up to 2900 mm, UTSP-0200, 0202, 0204, 0206 models with outer diameters from 200 mm up to 3700 mm ...
The test can be done either with an angle between pipes or under a shear force Machine can test pipes from diameter from 500mm to 1700 mm and length from...
The UTC-0715 is designed for the determination of initial setting time of fresh concrete for field and laboratory use. Standards AASHTO T197; ASTM C403 Stainless steel plunger has 32.3 mm²...
Corner Adapter has a rigid construction and can be used with Crack Monitors for monitoring internal or external corner angles of 70°—180°. Features: Monitors corner angles of 70°—180°. Slotted openings on one side...
Standard Crack Monitor has a simple design, is easy-to-use, and provides a measurement range of 20mm (0.78in) horizontally and 10mm (0.39in) vertically. The unit consists of an overlapping upper plate that...
UTC-4050 Crack Microscope is a high definition device which is used for measuring crack widths both in concrete and other structures like masonry walls. Consists of an adjustable lamp unit...
Crack Monitor Plus is made of clear polycarbonate. Adjustable slots for screws provide secure placement and tamper resistance. Once in place, the monitor’s two plates can move independently. Monitoring in three dimensions...
Crack Width Gauge measures the width and length of cracks in concrete structures, pavements, and other structural materials like plaster or drywall. It is constructed of durable clear polycarbonate plastic. The gauge...
